Glue Cement C2TE S1 FLEX


Cementitious Adhesive for Ceramic Tiles with low surface absorption and prolonged open time. No off-hook and with excellent Initial Adherence. For the laying of direct tiling on the brick factory and concrete blocks, without the need for prior plastering and in floors with irregular backgrounds. Application in interior and exterior ceramic pieces of porcelain, low absorption and large format


— Excellent workability and great whiteness
— Rheologically improved with high stability and excellent performance.
— Creamy thixotropy.
— Technologically advanced, compatible with a wide spectrum of media.
— Stable in a wide range of mix.
— High thixotropic efficiency, greater comfort and less effort.
— Avoid having to wet parts or supports thanks to its water retention power.
— Reduced sliding. Excellent initial adhesion.
— High open time, allows the rectification of parts.
or Deformable. Type S1. According to UNE EN 12002.
— Application thicknesses up to 15 mm, without shrinkage.
— Adhesion of all types of ceramic pieces, porcelain stoneware, marble, granite and natural stone.
— Interior and exterior application. Facades
— Adhesion of large format pieces.
— Gluing of large surfaces with intense traffic, floors with underfloor heating, cold rooms and overlays.
— Pool lining
— All the supports must have the appropriate flatness. If this is not the case, perform screeds of up to 5 mm maximum with the same product 48 hours before gluing


— Do not apply below 5ºC or above 30ºC.
— Do not apply with risk of frost, rain, strong winds or direct sunlight.
— Temperatures, ventilation, support absorption and coating materials can vary the workability and setting times of the adhesive.
— In extreme weather conditions (very windy or high temperatures) drying occurs faster than normal.


— Presentation: 25 kg sacks. 1400 kg pallets (56 bags)
— Colors: white and gray (the latter according to demand)
— Practical performance of the material applied on a substantially flat support: 4 Kg / m2.
— Conservation: 12 months from the date of manufacture, in the original container closed and protected from humidity.

Data sheet | DOWNLOAD

AENOR Certificate | DOWNLOAD

IQNET Certificate | DOWNLOAD