One Coat Mortar Scraped finish
Product made of high-strength white cement, selected aggregates, organic additives and pigments
CHARACTERISTICS AND APPLICATIONS
— Direct application to the enclosure wall with no need of plastering.
— Application in interiors and exteriors.
— Waterproof coating.
— Permeable to water vapor, allowing breathability to the support.
— Protect the upper edges of the coating against the penetration of rainwater.
— Do not apply on cellular concrete, plaster, paints, metal surfaces, plastic, insulation and materials of low mechanical resistance
— In case of heat, wind or very absorbent supports, it is recommended to moisten the support and wait for the disappearance of the water film.
— At singular points (joints between different materials, forged, pillars, blind boxes, angles of the frames of doors and windows, etc) assemble the mortar with fiberglass mesh to avoid fissures.
— On low porous substrates, apply a primer (EUROFIX) or improve the roughness by mechanical means.
— The supports must be resistant, stable, healthy and clean, free of dust, residues of release agents, organic products, etc
PRECAUTIONS AND RECOMMENDATIONS
— Do not apply below 5ºC or above 30ºC.
— Do not apply with risk of frost, rain, strong winds or direct sunlight.
— For thicknesses over than 2 cm it is recommended to apply the product in two layers.
— The minimum final thickness of use for plaster should be 10 mm.
— Presentation: 25 kg bags. 1400 kg pallets (56 bags)
— Colors: extensive range of more than 150 colors expandable according to customer needs
— Features: 1,5 kg / m2 and mm of thickness in flat support.
— Conservation: 12 months from the date of manufacture, in the original container closed and protected from humidity